LATEST SERVICE PROVIDER, PROFESSIONAL (JNCIP-SP) DUMP PDF & JN0-664 VCE DUMP

Latest Service Provider, Professional (JNCIP-SP) dump pdf & JN0-664 vce dump

Latest Service Provider, Professional (JNCIP-SP) dump pdf & JN0-664 vce dump

Blog Article

Tags: Valid JN0-664 Braindumps, JN0-664 New Test Bootcamp, JN0-664 Latest Exam Format, Exam Dumps JN0-664 Pdf, JN0-664 Dumps Discount

P.S. Free & New JN0-664 dumps are available on Google Drive shared by PassExamDumps: https://drive.google.com/open?id=16jUS0PO1SuVf2rk8eHa8LT6FzV_y8DBv

The Juniper JN0-664 dumps PDF format of PassExamDumps is portable and printable. It means you can print Juniper JN0-664 real questions for off-screen preparation. You can also access Juniper JN0-664 dumps PDF from smartphones, laptops, and tablets anywhere anytime to prepare for the JN0-664 Exam. This version of our JN0-664 questions PDF is beneficial for busy applicants because they can easily use JN0-664 dumps PDF and prepare for the Juniper JN0-664 test in their homes, offices, libraries, and even while traveling.

The JN0-664 exam covers a range of topics, including advanced routing protocols such as OSPF, IS-IS, BGP, and MPLS, as well as service provider-specific technologies such as LDP, RSVP, and VPLS. Candidates are also expected to have a strong understanding of network security, high availability, network automation, and network management best practices.

The JN0-664 exam covers a wide range of topics including but not limited to, OSPF, ISIS, BGP, MPLS, LDP, L2VPN, L3VPN, RSVP, BFD, VRRP, and many more. It is a comprehensive exam that tests your understanding of the underlying technologies, as well as your ability to apply that knowledge in real-world scenarios. JN0-664 Exam consists of multiple-choice questions, and you will have four hours to complete it.

Juniper JN0-664 (Service Provider, Professional (JNCIP-SP)) Certification Exam is a comprehensive test of a candidate's knowledge, skills, and abilities in service provider routing and switching technologies. Service Provider, Professional (JNCIP-SP) certification is highly regarded in the industry and can greatly enhance an individual's career prospects in the networking field.

>> Valid JN0-664 Braindumps <<

JN0-664 New Test Bootcamp & JN0-664 Latest Exam Format

Now you do not need to worry about the relevancy and top standard of PassExamDumps Service Provider, Professional (JNCIP-SP) (JN0-664) exam questions. These Juniper JN0-664 dumps are designed and verified by qualified JN0-664 exam trainers. Now you can trust JN0-664 practice questions and start preparation without wasting further time. With the JN0-664 Exam Questions you will get everything that you need to learn, prepare and pass the challenging Juniper JN0-664 exam with good scores.

Juniper Service Provider, Professional (JNCIP-SP) Sample Questions (Q18-Q23):

NEW QUESTION # 18
Referring to the exhibit, which two statements are true? (Choose two.)

  • A. This route is learned from the same AS number.
  • B. The multihop configuration is used for load balancing.
  • C. This route is learned from two different AS numbers.
  • D. The multipath configuration is used for load balancing.

Answer: A,D


NEW QUESTION # 19
Exhibit

Click the Exhibit button-Referring to the exhibit, which two statements are correct about BGP routes on R3 that are learned from the ISP-A neighbor? (Choose two.)

  • A. The BGP local-preference value that is used by ISP-A is not advertised to R3.
  • B. By default, the next-hop value for these routes is not changed by ISP-A before being sent to R3.
  • C. All BGP attribute values must be removed before receiving the routes.
  • D. The next-hop value for these routes is changed by ISP-A before being sent to R3.

Answer: A,B

Explanation:
Explanation
BGP is an exterior gateway protocol that uses path vector routing to exchange routing information among autonomous systems. BGP uses various attributes to select the best path to each destination and to propagate routing policies. Some of the common BGP attributes are AS path, next hop, local preference, MED, origin, weight, and community. BGP attributes can be classified into four categories: well-known mandatory, well-known discretionary, optional transitive, and optional nontransitive. Well-known mandatory attributes are attributes that must be present in every BGP update message and must be recognized by every BGP speaker.
Well-known discretionary attributes are attributes that may or may not be present in a BGP update message but must be recognized by every BGP speaker. Optional transitive attributes are attributes that may or may not be present in a BGP update message and may or may not be recognized by a BGP speaker. If an optional transitive attribute is not recognized by a BGP speaker, it is passed along to the next BGP speaker. Optional nontransitive attributes are attributes that may or may not be present in a BGP update message and may or may not be recognized by a BGP speaker. If an optional nontransitive attribute is not recognized by a BGP speaker, it is not passed along to the next BGP speaker. In this question, we have four routers (R1, R2, R3, and R4) that are connected in a full mesh topology and running IBGP. R3 receives the 192.168.0.0/16 route from its EBGP neighbor and advertises it to R1 and R4 with different BGP attribute values. We are asked which statements are correct about the BGP routes on R3 that are learned from the ISP-A neighbor. Based on the information given, we can infer that the correct statements are:
* By default, the next-hop value for these routes is not changed by ISP-A before being sent to R3. This is because the default behavior of EBGP is to preserve the next-hop attribute of the routes received from another EBGP neighbor. The next-hop attribute indicates the IP address of the router that should be used as the next hop to reach the destination network.
* The BGP local-preference value that is used by ISP-A is not advertised to R3. This is because the local-preference attribute is a well-known discretionary attribute that is used to influence the outbound traffic from an autonomous system. The local-preference attribute is only propagated within an autonomous system and is not advertised to external neighbors.
References: : https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.html :
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13762-40.html :
https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13759-37.html


NEW QUESTION # 20
You are configuring a BGP signaled Layer 2 VPN across your MPLS enabled core network. In this scenario, which statement is correct?

  • A. This type of VPN requires the support of the inet-vpn NLRI on all core BGP devices
  • B. You must use the same route-distinguiaher value on both PE devices.
  • C. This type of VPN only supports Ethernet interfaces when connecting to CE devices.
  • D. You must assign a unique site number to each attached site's configuration.

Answer: D


NEW QUESTION # 21
Referring to the exhibit, CE-1 is providing NAT services for the hosts at Site 1 and you must provide Internet access for those hosts.
Which two statements are correct in this scenario? (Choose two.)

  • A. You must configure a static route in the main routing instance for the 203.0.113.1/32 prefix that uses the VPN-A.inet.0 table as the next hop.
  • B. You must configure a static route in the main routing instance for the 10.1.2.0/24 prefix that uses the VPN-A.inet.0 table as the next hop.
  • C. You must configure a RIB group on PE-1 to leak a default route from the inet.0 table to the VPN-A.inet.0 table.
  • D. You must configure a RIB group on PE-1 to leak the 10.1.2.0/24 prefix from the VPN-A.inet.0 table to the inet.0 table.

Answer: A,C

Explanation:
We want a static route to the public IP. The private IP is hidden behind the NATed public IP, so a static route to the private range is useless to us.


NEW QUESTION # 22
Which two statements are correct about reflecting inet-vpn unicast prefixes in BGP route reflection? (Choose two.)

  • A. Route reflectors add their cluster ID to the AS path when readvertising client routes.
  • B. Route reflectors do not change any existing BGP attributes by default when advertising routes.
  • C. Clients add their originator ID when advertising routes to their route reflector
  • D. A BGP peer does not require any configuration changes to become a route reflector client.

Answer: B,D

Explanation:
Explanation
Route reflection is a BGP feature that allows a router to reflect routes learned from one IBGP peer to another IBGP peer, without requiring a full-mesh IBGP topology. Route reflectors do not change any existing BGP attributes by default when advertising routes, unless explicitly configured to do so. A BGP peer does not require any configuration changes to become a route reflector client, only the route reflector needs to be configured with the client parameter under [edit protocols bgp group group-name neighbor neighbor-address] hierarchy level.


NEW QUESTION # 23
......

Passing the JN0-664 exam with least time while achieving aims effortlessly is like a huge dreams for some exam candidates. Actually, it is possible with our proper JN0-664 learning materials. To discern what ways are favorable for you to practice and what is essential for exam syllabus, our experts made great contributions to them. All JN0-664 Practice Engine is highly interrelated with the exam. You will figure out this is great opportunity for you.

JN0-664 New Test Bootcamp: https://www.passexamdumps.com/JN0-664-valid-exam-dumps.html

2025 Latest PassExamDumps JN0-664 PDF Dumps and JN0-664 Exam Engine Free Share: https://drive.google.com/open?id=16jUS0PO1SuVf2rk8eHa8LT6FzV_y8DBv

Report this page